Paddling into the future: Restoring the legendary Chestnut canoe for a new generation - Action News
Home WebMail Thursday, November 14, 2024, 01:18 AM | Calgary | 6.7°C | Regions Advertise Login | Our platform is in maintenance mode. Some URLs may not be available. |
New Brunswick

Paddling into the future: Restoring the legendary Chestnut canoe for a new generation

The Miramichi Canoe workshop is flooded with the warm smell of wet cedar. Sunbeams cut through the windowsand illuminate the floating specks that give this canoe rescue place the slight taste of sawdust.

Thousands of the N.B. canoes were made by hand in the 20th century, many of them now in need of repair

Restored Chestnut canoes like this one continue to appear online sites. Decades after the last canoe rolled out of the Fredericton factory, these canoes remain popular. (Kijiji)

The Miramichi Canoes workshop is flooded with the distinctive scent of wet cedar. Sunbeams cut through the windowsand illuminate floating specks that give this "canoe rescue place" the slight taste of sawdust.

Throughout the shop and scattered around outsideare piles of canoesat different stages ofdecay.

Most still sport adistinctive logo: a single, brown nut within a wreath of six green leaves and the words, Chestnut Canoe Co. Ltd. Fredericton, N.B. Canada Pat. 1905.

WATCH /'The Cadillac of canoes': see how it gets made

Keeping the Chestnut canoe alive

2 years ago
Duration 5:58
Some New Brunswickers are dedicated to keeping Fredericton-made Chestnut canoes on the water long after the company closed.

Each Chestnut canoe wasmade by handfromthe turn of the 20th century tothe late 1970s. Built with theirsignature cedar-planked ribs bowed over a wooden frameand covered with stretched canvas, the youngestChestnut canoe would be creeping up on 50 years old today.

As each of these canoes awaits itsturn inside the workshop to be restored, the man who brings the canoes back to life reflects on how their dwindling numbers are all that's left of a legacy that spanned eight decades.

"It's the Cadillac of the canoes," said Norman Betts, who is spendinghis retirement athis workshop in Doaktown, alongside the Southwest Miramichi River, restoring Chestnuts to their former glory.

"They're meticulously made," Betts said. "They're not mass-produced. Every one is unique because the wood, the knots, the feel of every canoe is unique."

Norman Betts in his workshop in Doaktown where he restores canoes, most of them Chestnuts. (Roger Cosman/CBC News)

History of the Chestnut

Roger MacGregor also felt the "largest canoe company in theCommonwealth" wasn't getting its due. So in 1999, he published the book, When the Chestnut was in Flower,detailingthe rise and fall of the Fredericton enterprise.

MacGregor, now 78, recounts how in 1900, brothers Henry and William Chestnuttook over their father's successful hardware business in downtown Fredericton.

They started catering to wealthysportsmen coming from Boston and New York to hunt moose, bear and caribouor to fish for salmon on the Miramichi River.

Chestnut Canoe postcard from Fredericton. (Submitted by the Provincial Archives of New Brunswick)

At that time, canoesmade of birch bark in the Indigenous tradition dominated the market. But the Chestnut canoe was born with the advent of canvas, a tightly woven, heavy fabric.

"They just covered these wooden boats with canvas, which pretty much is the start of the canvas-covered canoein Canada,"MacGregor said.

Betts has several Chestnut canoes in his yard, all awaiting their turn inside his workshop. (Roger Cosman/CBC News)

He notes asimilar technique was being applied by rival Old Town Canoe Company in Old Town, Maine, but the Chestnut brothers were quick to file a successful patent in Canada.

"They made a factory business out of it," MacGregor said. "And you could say they took their lead from Old Town."

Standing on the left is Dick Wickett, father of Don Wickett, a foreman at the Chestnut Canoe Factory. Seated is Harry Chestnut, co-founder of the factory. (Submitted by the Provincial Archives of New Brunswick)

Chestnut took more than that, poaching Old Town'sforeman for its new factory.

According to MacGregor, the very first Chestnuts were built in 1904 at what was known as Calder's boathouse, at a location that would now be under the abutments of the city'sWestmorland Street bridge.

A year later, the companybuilt a factory at 220 King St. Then in 1907, an expanded factory was built on York Street. It was lost in a fire butimmediately rebuilt. Today the building still stands, formerly a popular bar, it now houses government offices.

The first Chestnut factory on King Street in downtown Fredericton. (Submitted by Provincial Archives of New Brunswick)

Within a few years, thefactory was producing more than 1,000 Chestnut canoes ayear.

MacGregor recalls being fascinated with workers' accounts of an elevator the size of a living room that would move dozens of canoes from floor to floor for distinct stages of production.

Chestnut built another canoe factory, much bigger than its first, on York Street. The original building burned, but the one that replaced it still stands today. (Submitted by Provincial Archives of New Brunswick)

In its heyday, the Chestnut Canoe factory was a destination, he said, with customers going out of their way to make the trip to Fredericton to pick up their canoesand watch the process of steamed cedar planks being bent over a mould to form the ribs.

"The Chestnut canoe people had perfected the art of building these canoes over a hull or a form," said MacGregor.

And despite being about100 years old, several of those original forms still exist.

Hidden history

Tucked away in an old dairy barn outside Fredericton are seven original Chestnut canoe moulds. Each one was used to build "hundreds and hundreds" of Chestnut canoes over nearly 80 years.

The moulds, or forms, simply look like overturned canoes. Made from heavy wood, they haveiron ribs instead of cedar, and thecanoes were built overtop of them. When brass tacks were hammered into the cedar ribs, their tips would mash againstthe iron ribs, forming a button. When the canoe frame was finished it was simply lifted off the form.

Several of the original Chestnut canoe forms still exist today. Donald Fraser owns seven of them. Each one is around 100 years old. (Shane Fowler/CBC News)

When the Chestnut canoe company folded in 1979 after years of financial hardship, a dedicated employee decided to take a chance onrescuing the moulds.

Donald Fraser spent 28 years working for the Chestnut Canoe, and wasonly 50 when the company collapsed. That was the year he decided to try building a canoe himself.

"I just decided that it wasn't possible to just walk into another job somewhere at that time," said Fraser, who decided that if the company wasn't going to keep building canoes he wouldtake up the mantle.

"I didn't build canoes at Chestnut," said Fraser."I was in sales. But I had spent a lot of time going through the factory, and you'd learn something every time you walked through the plant."

Donald Fraser stands over one of the original Chestnut canoe forms he purchased from the company when it closed in 1979. (Shane Fowler/CBC News)

Fraser bought seven of the Chestnut moulds, and over the next 28 years with help from hislate wifeIsabel, Fraser built230 individual canoes.

"I made a very moderate, modest living," said Fraser, now 92.

"It kept the wolf away from the door is all it amounts to."

Fraser (left) built 230 canoes with the help of his late wife, Isabel, using the old Chestnut canoe molds. (CBC News)

He sold those Frasercanoes throughout New Brunswick, Ontario, B.C. and Washington State. A few were even shipped to Europe.

"I can't call them Chestnuts, but they were built off of Chestnut forms," said Fraser.

He built his last canoe about 15 years ago, but he's still fiercely protective of the moulds. Despite offers, he won't sell them.

Using the original Chestnut molds, Fraser canoes are Chestnuts in spirit, said Fraser. (Shane Fowler/CBC News)

For 56 years, Fraser said, the moulds formed his livelihood and he's honouredto be part of their history.

"They were probably the most popular canoe in Canada," he said.

"The quality of the Chestnut was well known. And then it ended. And that's the reason they're still popular."

Norman Betts bends cedar planks over a canoe mould in his workshop in Doaktown. (Roger Cosman/CBC News)

Chestnut future

Fraser, MacGregorandBetts all attribute Chestnut's demise to the company trying to do too much instead of just focusing on canoes. There was an attemptto get into motorboats and fibreglass canoes, but it didn't work.

While the Chestnut Canoe Company is gone, online marketplacesare littered with Chestnut canoes for sale.

Prices vary depending on their condition, but usually they're at least $1,000.

Betts said it's a testament to the quality of the workmanship.

"We live in this throwaway world now where you buy a plastic this and a plastic that," said Betts.

"And, yeah, you can go to Canadian Tire and Costco and buy a plastic canoe for 600 bucks, and you can go down the river. There's people who want to do that. Good for them."

Betts poles his canoe through an inlet on the southwest branch of Miramichi River (Shane Fowler/CBC News)

MiramichiCanoessees a constant flow of Chestnuts coming through its doors.Betts feels New Brunswickers are just starting to appreciate their quality.

Many of his restorations are canoes that belonged to someone's grandparent, and there's an heirloom statusthat comes with them.

So as long as there's a Chestnut canoe that could use new canvas, a layer of paint or some ribs replaced, Betts said there will be someone who will recognize its value to Canadian history.

"Somebody asked me what I'd do if I make one million dollars," said Betts. "And I said, I'll just keep fixing canoes until that's all gone."