Axle bearings on Ottawa LRT might need to be redesigned - Action News
Home WebMail Friday, November 22, 2024, 07:58 PM | Calgary | -11.4°C | Regions Advertise Login | Our platform is in maintenance mode. Some URLs may not be available. |
Ottawa

Axle bearings on Ottawa LRT might need to be redesigned

The way the wheels of Ottawa light rail vehicles meet the rails might not be the main cause of axle problems, according to the city'sdirector ofengineering services.

Maintenance subcontractor Alstom to deliver report to City of Ottawa in May

A photo of crews walking along the LRT on Aug. 9, 2021. It shows an out-of-service LRT train that derailed after an axle broke.
Crews walk along the Confederation Line in Ottawa on Aug. 9, 2021, one day after an axle broke on this out-of-service LRT train and a wheel fell off. (Alexander Behne/CBC)

The way the wheels of Ottawa light rail vehicles meet the rails might not be the main cause of axle problems, according to the city's director of engineering services.

Instead, Richard Holdersaid there are hypotheses that restraining rails meant to minimize derailments at curves could be putting force on the axles, or transitions on the rail might not be smooth in some locations.

"We will continue to work with our maintainer on the root cause analysis of the bearing issue," he toldthe city's LRT subcommittee on Friday."This may lead to a redesign of the axle bearing assembly in order to resolve this issue long term."

That would be a huge job acrossthe fleet, but it's too early to say if it that will be the required fix, staff said.

Since August 2021, the City of Ottawa, its contractor Rideau Transit Maintenance (RTM), and RTM's subcontractor Alstom, have been trying to figure out whyan axle broke and a wheel fell off a train leading to a derailment. The following summer, more light rail trains were pulled from service becauseof unusual vibrations and maintainers found a damaged wheel hub.

With no permanent solution yet sorted out, Ottawa's LRT has been running at slower speeds along certain sections of track and has been undergoingextra inspections as a precaution.

"Thebiggest issue we face is trying to ensure [the problem] is solved in a sustainable way moving forward," remarked Kitchissippi Coun. Jeff Leiper.

Alstom report in May

The update on the axle bearingscame towardthe end of a lengthy presentation about how the City of Ottawa is acting on the 103 recommendations of a public inquiry into the procurement and problems of Ottawa's LRT.

In his report last November, commissioner William Hourigan called that interface between the wheels and rails "the most significant area that must be improved."

During inquiry hearings in June 2022, representatives from Alstomhad presented the theorythe stress on the axle componentscame from excessive pressure going around sharp curves on the Confederation Line.

A photo of Richard Holder, the City of Ottawa's director of engineering services.
The City of Ottawa should receive a report in next month with more details about what has caused issues with the LRT's axles, said Richard Holder, the city's director of engineering services. (Kate Porter/CBC)

Nearly a year later, Alstom is due to deliver another report in May to the City of Ottawa.The CEO of Rideau Transit Group, Nicolas Truchon, saidit will include a number of hypotheses and lead to a "punch list" of actions to improve the LRT.

Studying the axle issue

Several more investigationshave taken place in the year since the public inquiryhearings Holder showed a flowchart of all the studies and preventative measures.

The National Research Council looked specifically at the interface between the rail and wheel, and recommended reducing friction on curves by adapting the profile of the wheel and grinding the rail, Holder explained.

Another study focused on the track infrastructure, whiletheTransportation Safety Board had also done an investigation.

Meanwhile, Alstomhas putinstruments on bogeys to test friction on the rails and forces on axles, at different speeds. Small sensors are also installed on 40 axles on four light rail vehicles asa pilot project to detect vibrations.

Each time a study produces information, there's a deeper understanding of why the wheel hubs might have failed, Holder said.

"At this time, ourmaintainer believes that the wheel rail interface is not a major contributing factor as part of the bearing issue," Holder told the committee.